Introduction
As more and more people pay attention to oral problems, the number of dental clinics is also increasing. Medical wastewater will also be produced in daily business diagnosis and treatment. Medical wastewater can be discharged after treatment according to the “Water Pollutant Discharge Standard for Medical Institutions”, but dental clinics The produced sewage contains a large number of bacteria, viruses, parasite eggs and some toxic and harmful substances. It must be disinfected before being discharged. However, the quality and quantity of sewage fluctuate greatly. Regulation must be strengthened to stabilize the quality and quantity of sewage and avoid the impact of impact loads on the wastewater. The impact of biological treatment facilities and whether sewage treatment meets standards will be an important basis for whether a clinic can be opened.
Since hospital sewage contains a large number of pathogenic microorganisms and toxic substances, sewage discharge standards require that sewage from clinics and hospitals must undergo first-level disinfection before being discharged to the pipe network.
Features of oral and dental clinic sewage treatment equipment
1.Small footprint and easy installation
2.Automatic operation,simple operation,and the entire system does not require special management
3.The system processing effect is stable and reliable
4.Beautiful appearance, compact structure, easy to move
5.No need to add chemicals, saving subsequent operating costs
6.Ozone disinfection, the sterilization rate reaches 99%, and the disinfection is complete.
The above points enable the pretreatment and disinfection of sewage disinfection in oral and dental clinics to be carried out simultaneously and discharged in compliance with standards.
Sewage discharge from medical clinics should meet the following standards
1.Take 500ml of each sample for three consecutive times for testing. Enteric pathogenic bacteria and tuberculosis bacilli must not be detected.
2.The total coliform count shall not exceed 500 per liter.
3.The total residual chlorine is 4-5mg/L.
4.The contact time between sewage and chlorine is not less than 1 hour, which is the discharge standard for sewage processors in oral and dental clinics.
The following points should be taken into consideration when designing sewage treatment equipment
It should be far away from the treatment area and reception area, and designed in a relatively hidden place.
It should have anti-corrosion and anti-leakage facilities, generally made of 1 cm thick high-strength melamine board.
Ensures durability of treatment.
Easy to operate, convenient for disinfection and cleaning.
Dental clinics often use physical methods to treat sewage. There is no need to add chemicals, there will be no excessive chlorine emissions, and there will be no subsequent investment costs. The main body of the process is precipitation + ozone disinfection + filtration and adsorption. The principle that ozone comes from the air is to use high-voltage electricity to decompose part of the oxygen in the air and then polymerize it into ozone. It is a process of allotropic transformation of oxygen.
Ozone sterilization is a bacteriolysis-level method, sterilizing, leaving no residue, and has broad sterilization spectrum. It can kill bacterial propagules, spores, viruses, fungi, etc. In addition, O3 also has a strong killing effect on mold. Due to its poor stability, O3 will quickly decompose into oxygen or a single oxygen atom, and a single oxygen atom can combine into oxygen molecules on its own. There is no toxic residue. Therefore, compared with traditional sterilization and disinfection methods, there are dead ends and workload. It has shortcomings such as large size, residual pollution or odor, and may harm human health. O3 is a pollution-free disinfectant. O3 is a gas that can quickly diffuse into the entire sterilization space, and there are no dead ends in sterilization.
Why Choose Us?
CNMEDITECH is dedicated to the long-term research of the medical equipment market. Our mission is “People oriented and win-win strategy,Matching the real needs of the region with a focus on human health,To be the world’s first-class medical field solution expert”.We have been manufacturing high-quality medical device products for more than ten years.
We have built our reputation on delivering quality healthcare solutions on time and on budget.All our products comply with international health and safety regulations and all products come with a warranty.
Are you still worrying about your customer’s product needs?Are you still angry that the product is expensive? We have various medical equipment and support personalized product customization.
Our company has many styles to choose from.In addition, we have high-quality pre-sales consulting guidance and professional after-sales service, all to meet your needs.
Whether it is a cost-effective or high-end product, there will always be something suitable for you.If you have any needs for products, you can ask us, our factory will meet your needs as soon as possible, and we will make every effort to provide you with solutions.Feel free to send us your inquiries.
